Last Updated on April 20, 2024
The Oreck air purifier is a pretty advanced device. It has high-end air purification technologies baked into it. For that reason, it does a proper job of cleaning and removing the ozone and odors from the air. However, no matter how advanced the device is, you can still face some issues with it in the long run.
To illustrate, you can hear arcing sound from the air purifier. That would eventually make you think why is my Oreck air purifier sparking, right? Well, the spark or arcing would indicate that a large air particle got into the device. This crackle or pop is pretty normal.
However, when the arcing, crackling, or sparking sound is excessive, it is something that you need to worry about. So, what do you do then? To find that out, you should stick with the discussion till the end.
What Makes the Oreck Air Purifier Spark?
Firstly, let’s talk a little more about the question of why does my air purifier spark. You see, the Oreck air purifiers have a primary purification compartment, which is the Truman cell. This cell charges and collects particles via electrostatic charge. And as you might have guessed, it relies on electricity to do that.
Through this technology, the air purifier can adequately eliminate the microorganisms that float in the air. That includes bacteria, viruses, fungi, mold, and odor.
So, when you hear a pop or crackle on the air purifier, it means that the Truman cell has captured a large-sized particle. The particulate was so large that it made the electrostatic charge go pop. And it is something that can occur naturally. A random pop or spark once in a while is not something that you should worry about.
How Do You Fix Excessive Crackling or Sparking in Oreck Air Purifiers?
Now that you know the answer to the question of why is my air purifier crackling, let’s get to the second part of the discussion. So, the device might emit a crackling, sparking, or popping sound once in a while. That is pretty normal. But when the sounds get excessive, you need to go through these steps to fix it:
Step 1: Turn the Air Purifier Off
To start with, you will need to turn the air purification device off. Turn it off through the button present on the device or remote, and then unplug the power cord from the outlet.
Step 2: Remove the Truman Cell
Now that the device is off, you need to work on getting the Truman cell. For this, place the purifier in such a manner that the hinged cover faces upward. Then, press the release button, which will open the cover. You should be capable of seeing the handle of the collector cell.
Grab onto the handle of the cell and remove it by carrying out a straight and upward pull motion.
Step 3: Clean and Place the Turman Cell Back into the Slot
After getting the Truman cell out of the air purifier, you need to clean Truman cell. First, make a cleaning solution using a combination of warm water and liquid detergent. Ensure the water is not too hot and the detergent is not harsh.
Rinse the Truman cell with that cleaning solution and hold it under the running tap water. Let the cell dry for a while, then place it back into the slots. Make sure to put the cover back on.
Through this cleaning process, you will get rid of any large air particles trapped inside the cell. And that should eventually stop the crackling, sparking, and popping sounds.
Final Words
When you hear a pop from your air purifier and wonder why is my Oreck air purifier sparking, just know that the sound is from the Truman cell. This cell traps air particulates through static electricity. And when a relatively large-sized particle gets stuck in the cell, it makes a pop, crackle, or spark sound.
